EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Product Range
- »
- RO And Hydranautics Membranes
RO And Hydranautics Membranes
Offering you a complete choice of products which include toray ro membrane, 1000 lph industrial reverse osmosis plant, industrial ro mineral water plant, cpa3-8040 hydranautics membranes, commercial and industrial ro membrane and dow filmtec bw30-400 ro membrane.
Toray RO Membrane
Product Price: Rs 34,000 / PieceGet Best Price
Product Details:
| Model Name/Number | TM710D |
| Brand | Toray |
| Minimum Salt Rejection | 99.65% |
| Product Flow Rate (gpd (m3/d)) | 2,600 (9.8) |
| Size | 4040 mm |
| Membrane Area (ft2 (m2) | 87 (8) |
| Nominal Salt Rejection | 99.8% |
| Minimum Product Flow Rate (gpd (m3/d)) | 2,150 (8.2) |
| Feed Spacer Thickness | 31 mil |
Applications
- Municipal drinking water, Industrial process water, Water reuse
Operating Information
- Please consult the latest Toray technical bulletin, design guidelines, computer design program, or call an application specialist for the recommended design range. Not strictly following the operating limits stated in this bulletin will void and nullify the Limited Warranty.
- All RO elements are wet tested treated with a 1 percent by weight sodium bisulfite storage solution. Afterwards, the RO elements are vacuum packed in oxygen barrier bags or treated with a tested feed water solution, and then vacuum sealed in oxygen barrier bags with deoxidant inside. Toray recommends flushing Toray RO elements for 30 to 60 minutes once every two days with sufficient quality flushing water, such as pre-treated feed water, to prevent biological growth during system shutdown. Please refer to the Toray RO Handling Manual for suggested flushing water quality.
- The presence of free chlorine and other oxidizing agents under certain conditions, such as heavy metals that act as oxidation catalysts in the feed water, will cause unexpected oxidation of the membrane. Toray strongly recommends removing these oxidizing agents contained in feed water before operating the RO system.
- Permeate from the first hour of operation shall be discarded.
- The customer is fully responsible for the effects of chemicals that are incompatible with the elements. Their use will void the element Limited Warranty.
- Maximum operating pressure will vary depending on feed temperature. Please ask for detailed information from Toray if needed.
Get Best QuoteRequest A Callback
1000 Lph Industrial Reverse Osmosis Plant
Product Price: Rs 95,000 / PieceGet Best Price
Minimum Order Quantity: 5 Piece
Product Details:
| Model Name/Number | 1000 LPH |
| Brand | BWP(BLUE WATER PURIFIER |
| RO Capacity | 1000(Liter/hour) |
| Purification Type | MINERIAL WATER PLANT |
| Material | FRP |
| RO Membrane Type | FLIMTECH,HYDERANTICS, AXION ,GE(SUEZ) |
| Usage/Application | Commercial |
| Features | QUALITY CRI PUMPS,FILMTECH MEMBRANE'S |
| Max Water Recovery Rate | 50-55 % |
| Country of Origin | Made in India |
1000 LPH RO Plant Specification
TECHNICAL DETAILS
- Row Water Feed Pump
Material Of Construction : C.Is
Make : CRI , Kriloskar
Drive Motor : Single Phase
Additional Information:
- Production Capacity: 20 LITER BOBBLE TOP - 50 CANS PER HOUR
- Delivery Time: 24 HOUR'S
- Packaging Details: BOX'S AND BAG'S
Get Best QuoteRequest A Callback
Industrial RO Mineral Water Plant
Product Price: Rs 1.05 Lakh / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Model Name/Number | 2000 LPH |
| Brand | BWP(BLUE WATER PURIFIER |
| RO Capacity | 2000 (Liter/hour) |
| Purification Type | RO |
| Material | FRP |
| RO Membrane Type | FLIMTECH,HYDERANTICS, AXION ,GE(SUEZ) |
| Usage/Application | Water Purification |
| Country of Origin | Made in India |
1000 LPH RO Plant Specification
TECHNICAL DETAILS
- Row Water Feed Pump
Material Of Construction : C.Is
Make : CRI , Kriloskar
Drive Motor : Single Phase
Get Best QuoteRequest A Callback
CPA3-8040 Hydranautics Membranes
Product Price: Rs 33,500 / PieceGet Best Price
Product Brochure
Product Details:
| Model Name/Number | CPA3-8040 |
| Brand | Hydranautics |
| Usage/Application | Industrial |
| Permeate Flow Rate | 11,000 gpd (41.6 m3 /d) |
| Configuration | Spiral Wound |
| Membrane Active Area | 400 ft2 (37.1 m2 ) |
| Permeate Flow for any Element | 5:1 |
| Feed Spacer | 31 mil (0.787mm) |
| Maximum Applied Pressure | 600 psig (4.14 MPa) |
| Maximum Operating Temperature | 113 DegreeF (45 DegreeC) |
| Membrane Polymer | Composite Polyamide |
| Salt Rejection | 99.7% (99.6% minimum) |
| Maximum Chlorine Concentration | < 0.1 PPM |
| pH Range, Continuous (Cleaning) | 2-10.8 (1-12.5) |
| Maximum Feed Water Turbidity | 1.0 NTU |
| Maximum Feed Water SDI (15 mins) | 5.0 |
| Maximum Pressure Drop for Each Element | 15 psi |
| Maximum Feed Flow | 75 GPM (17.0 m3 /h) |
Test Conditions
- The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
- 1500 PPM NaCl solution
Get Best QuoteRequest A Callback
Commercial And Industrial RO Membrane
Product Price: Rs 2.5 Lakh / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Capacity | 1000 lph |
| Membrane Length | 8040 |
| Membrane Material | Polypropylene |
| Automation Grade | Semi-Automatic |
| Feed Water Temperature | 8040 |
| Maximum Chlorine Concentration | 8040 |
| Membrane Diameter | 8040 |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Dow Filmtec BW30-400 RO Membrane
Product Price: Rs 29,000 / PieceGet Best Price
Product Brochure
Product Details:
| Maximum Operating Temperature | 113 Degree F (45 Degree C) |
| Maximum Pressure Drop | 15 psig (1.0 bar) |
| Maximum Feed Flow | 70 gpm (15.9 m3/hr) |
| Packaging Type | Box |
| Membrane Type | Polyamide Thin-Film Composite |
| Maximum Operating Pressure | 600 psig (41 bar) |
| Maximum Feed Silt Density Index | SDI 5 |
| Free Chlorine Tolerance | < 0.1 ppm |
| Brand | Dow |
| Model Number | Filmtec BW30-400 |
The FilmTec™ BW30-400 is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane element on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors.
- DuPont superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year.
- FilmTec™ BW30-400 Elements deliver high flow and high rejection without being chlorinated during the manufacturing process. This is one reason why FilmTec™ Elements are more durable and may be cleaned over a wider pH range (pH 1-13) than other RO elements.
- With more than a decade of proven performance, FilmTec™ BW30-400 is the product you can rely on for years of trouble-free operation.
Product Type
- Spiral-wound element with polyamide thin-film composite membrane
Important Information
- Proper start-up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock. Following the proper start-up sequence also helps ensure that system operating parameters conform to design specifications so that system water quality and productivity goals can be achieved.
- Before initiating system start-up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.
Operation Guidelines
Avoid any abrupt pressure or cross-flow variations on the spiral elements during start-up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start-up, a gradual change from a standstill to operating state is recommended as follows:
- Feed pressure should be increased gradually over a 30-60 second time frame.
- Cross-flow velocity at set operating point should be achieved gradually over 15-20 seconds.
General Information
- Keep elements moist at all times after initial wetting.
- If operating limits and guidelines given in this bulletin are not strictly followed, the FilmTec™ Reverse Osmosis and Nanofiltration Three-Year Prorated Limited Warranty (Form No. 45-D00903-en) will be null and void.
- To prevent biological growth during prolonged system shutdown, it is recommended that membrane elements be immersed in a preservative solution.
- The customer is fully responsible for the effects of incompatible chemicals and lubricants on elements.
- Maximum pressure drop across an entire pressure vessel (housing) is 50 psi (3.4 bar).
- Avoid static permeate-side backpressure at all times.
Get Best QuoteRequest A Callback
Hydronautics Ro Membrane
Product Price: Rs 29,000 / PieceGet Best Price
Product Details:
| Usage/Application | Water Treatment |
| Brand | Axeon |
| Capacity | 1000 liter |
| Automation Grade | Automatic |
| Applicable Industry | RO |
| Size | 8040 |
| Weight | 13kg |
| Model/Type | 8040 |
| Specifications | |
| Brand | Axeon |
| Type | Sea-Water |
| Average NaCl rejection percentage | 99.10 % |
| Minimum NaCl rejection percentage | 98.60 % |
| Average MgSO4l rejection percentage | >99.1 % |
| Max Pressure kPa | 6894.8 |
| Max Pressure psi | 1000 |
| Max Pressure bar | 69 |
| Max Temperature °C | 45.0 |
| Max Temperature °F | 113 |
| Membrane Active Area ft2 | 300 |
| Membrane Active Area m2 | 27.8 |
| Flow gpd | 6000 |
| Flow m3/day | 22.6 |
Dimensions / Weights |
|
| Length in inch | 40 |
| Length in cm | 101.6 |
| Carton shipping weight in lbs | 37.5 |
| Carton shipping weight in kg | 17.0 |
Get Best QuoteRequest A Callback